To configure Certificate Enrollment Gateway for ACMEv2 enrollment, you must configure the ACMv2 enrollment settings in Certificate Enrollment Gateway. You can edit the ACMEv2 enrollment settings using the Management Console interface.

To configure Certificate Enrollment Gateway for ACMEv2 enrollment

1. Log in into the Management Console as explained in Logging into the Management Console.
2. In the Certificate Enrollment Gateway pane, click Manage Solution.
   A Certificate Enrollment Gateway page appears.
3. In the left navigation bar, click Configuration.
   A Product Configuration pane appears.
4. Turn on Enable Advanced Configuration.
5. Click Next.

6. Click the ACMEv2 tab and configure the following settings. 

   • Enable ACMEv2
   • ACMEv2 Order Expiry Interval
   • Delete Expired Order Cron Job
   • Delete Expired Authorizations Cron Job
   • ACMEv2 DNS-01 Nameservers
   • ACMEv2 DNS-01 Query Timeout
   • ACMEv2 HTTP-01 Retry Count
   • ACMEv2 HTTP-01 Retry Interval
   • ACMEv2 HTTP-01 Redirect on POST

7. Configure any other settings if required.
8. After configuring the settings, click Validate to validate the settings.
   If any configuration errors are detected, correct the errors then click Validate again.
9. After validating the configuration settings, click Next.
   Entrust PKI Hub uploads the configuration and any attached files, such as P12 credentials.
10. In the Product Deployment Status pane, re-deploy Certificate Enrollment Gateway with the updated configuration file by clicking Deploy.
    A dialog box appears, prompting you to confirm the operation. Click Yes to confirm the operation and deploy the Certificate Enrollment Gateway solution.